Thursday, December 13, 2018

Finished! 12/13/18

We have now accomplished all parts of the challenge. Our first official try of the midterm challenge we achieved a score of 70% while our second attempt resulted in a higher score of 80%. Now that we've finished the midterm we are done with the requirements needed for the 2nd quarter.
  

Monday, December 10, 2018

Coding 12/10/18

This is the week we finalize the autonomous and manual challenges which make up our midterm grade. We have finished the code for the autonomous portion of the challenge and must practice the manual portion now until each section of it can done in 20 seconds consecutively. We will continue to run the code for autonomous and perfect it while also figuring out the best way to accomplish the manual portions within the qualifying times.
  

Friday, December 7, 2018

Practice Makes Perfect 12/7/18

The end of the week is here and were practicing the challenge manually within the arena. Once we have the manual maneuvers down we'll need to move on the autonomous portion of the challenge. As we go along with the practice of the challenge we are faced with different difficulties such as the axle misalignment and motor attachment. These smaller problems we are fixing along the way while also perfecting our strategy for the midterm challenge.
  

Monday, December 3, 2018

Testing Testing 12/3/18

This week we will begin to test the robot and its ability to maneuver around the obstacles and challenges within the arena. We will need to be able to complete t`he challenges both manually and autonomously. The midterm challenge includes 3 elements needed to be performed quickly and consecutively using the controller and a code for autonomous. These elements will include hitting a flag, shooting a ball, as well as flipping a cap. The solid works design for our robot will also be worked on during the week and will need to be accomplished hopefully by the end of next week.
  

Friday, November 30, 2018

Finished Program 11/30/18

We've now finished the code for the robot and will begin to test the code within the arena. Now that the code was finished we'll need to test and adjust it according to obstacles and variations on the robot and within the arena. This will most likely be done over the majority of the next few weeks.
  

Monday, November 26, 2018

Programming Robot 11/26/18

This week we will continue to work on the programming for the robot challenge. Because the challenge is somewhat extensive we will need to have code covering many different elements of the challenge. Not only do we need to code for the manual use of the robot but also the autonomous code for both near and far positions in the arena. This week will also need to be filled with adjustments to the robot physically.
 

Monday, November 19, 2018

Thanksgiving Week 11/19/18

There's only two days of school this week due to thanksgiving. We have decided to work on the programming for the robot. Once the programming is finished it will need to be tested. This will be accomplished and then we will move on to the adjusting stage and make any changes to the code that need to be made.
  

Friday, November 16, 2018

Been Built 11/16/18

The robot has been finished and is ready to be programmed. The arm and the shooter are mounted onto the frame of the bot.The cortex and wires have also been added to the robot. The gear mechanism used for retrieving the balls is also done and needs to be programmed.
  

Monday, November 12, 2018

Arms 11/12/18

This week we will focus on building the arm which will be used to pick up and flip caps within the arena. The arm will be built long enough to mount the caps on top of the poles on the perimeter of the arena. This arm will be mounted to the back of the robot in order to stay within the 18 x 18 model and within competition regulations. The arm will be used to pick up caps both manually and autonomous.
   

Friday, November 9, 2018

Building Ramps and Arms 11/9/18

The new parts for the robot design will be built and put on the robot next week. On the robot, once the ball is fed through the gears and onto the ramp down to the new launcher it will be launched towards the flags.
  

Monday, November 5, 2018

Ideas 11/5/18

This week we've moved the launcher to a new location and decided on a new design for the robot. The new design for the robot will include 4 gears fitted with rubber bands in the front of the robot in order to pick up balls within the arena as well as an arm fitted to the back to pick up and flip  caps.
  

Friday, November 2, 2018

Mounted 11/2/18

The end of this week included the mounting of the launcher to the back of the robot. This task is finally complete, and we are ready to begin the construction of the arm needed to lift and place the blue/red caps within the arena.
  

Monday, October 29, 2018

Re-positioning 10/29/18

In the beginning of this week, we have resumed rebuilding the design of the robot from the base. This has resulted in the re-positioning the launcher to the middle of the robot from the left side in order to make room for the arm we are planning to build. After we've cleared some room we'll mount the launcher in the middle. After this is done the arm will be built around this in order to pick up and place caps.
  

Friday, October 26, 2018

Designed to Succeed 10/26/18

At the beginning of this week we dismantled the robot down to the base in order to start a new design for this next challenge. We've decided to use this new design to sweep up the balls in the arena, feeding them immediately into the launcher mounted behind it. This will allow us to launch the ball at the same relative angle as before as well as reduce the area of the robot needed in order to feed the launcher the ball. This extra space will allow us to use it for the arm mechanism needed to move the caps within the arena and put them on the flags on the perimeter.
  

Monday, October 22, 2018

Dismantling 10/22/18

The beginning of this week has been productive in our pursuit towards a new robot design. This path starts with the dismantling of the original design. The robot has been striped down to the base (Depicted Below) and will be built back up within the next week or so. After this is done, well be able to complete the third challenge.

  

Friday, October 19, 2018

Arms Race 10/19/18

This weeks work has been mostly ideas and less execution, about the many ways to build the arm to our robot. The arm we need to build will need to be lift up the caps within the arena as well as be able to place them on top of the poles surrounding the perimeter of the arena. We will most likely end up scrapping the design used for the previous challenge and replacing it with one which will accomplish both challenges including the flags and caps.
  

Monday, October 15, 2018

Quarter 1 Ends 10/15/18

The beginning of this week has been spent in thought. Mainly of what we need to accomplish in order to finish the next vex challenge. One of these tasks includes the assembly of an arm capable of picking up the caps within the arena as well as rotating and placing them onto the poles on the edge of the competition area. Once the idea is thought through the arm will be built and placed on the robot hopefully within the next week or so.
  

Thursday, October 11, 2018

Solid Works 10/11/18

This week we mostly worked on finishing the solid works model needed to represent the robot we've built in the last few weeks (seen below). This has been a chore all week because of complications within solid works. This will hopefully be fixed within the day or at least by next week.

Challenge #3 10/8/18

The plan this week is to begin the process of building the arm needed for the next challenge due this Friday. So far, this is yet to be started, but will hopefully be functional by the end of this week. After the arm is built and attached to the robot, we will begin trying to to accomplish the challenge.
  

Finished! 12/13/18

We have now accomplished all parts of the challenge. Our first official try of the midterm challenge we achieved a score of 70% while our se...