Friday, November 9, 2018

Building Ramps and Arms 11/9/18

The new parts for the robot design will be built and put on the robot next week. On the robot, once the ball is fed through the gears and onto the ramp down to the new launcher it will be launched towards the flags.
  

Monday, November 5, 2018

Ideas 11/5/18

This week we've moved the launcher to a new location and decided on a new design for the robot. The new design for the robot will include 4 gears fitted with rubber bands in the front of the robot in order to pick up balls within the arena as well as an arm fitted to the back to pick up and flip  caps.
  

Friday, November 2, 2018

Mounted 11/2/18

The end of this week included the mounting of the launcher to the back of the robot. This task is finally complete, and we are ready to begin the construction of the arm needed to lift and place the blue/red caps within the arena.
  

Monday, October 29, 2018

Re-positioning 10/29/18

In the beginning of this week, we have resumed rebuilding the design of the robot from the base. This has resulted in the re-positioning the launcher to the middle of the robot from the left side in order to make room for the arm we are planning to build. After we've cleared some room we'll mount the launcher in the middle. After this is done the arm will be built around this in order to pick up and place caps.
  

Friday, October 26, 2018

Designed to Succeed 10/26/18

At the beginning of this week we dismantled the robot down to the base in order to start a new design for this next challenge. We've decided to use this new design to sweep up the balls in the arena, feeding them immediately into the launcher mounted behind it. This will allow us to launch the ball at the same relative angle as before as well as reduce the area of the robot needed in order to feed the launcher the ball. This extra space will allow us to use it for the arm mechanism needed to move the caps within the arena and put them on the flags on the perimeter.
  

Monday, October 22, 2018

Dismantling 10/22/18

The beginning of this week has been productive in our pursuit towards a new robot design. This path starts with the dismantling of the original design. The robot has been striped down to the base (Depicted Below) and will be built back up within the next week or so. After this is done, well be able to complete the third challenge.

  

Friday, October 19, 2018

Arms Race 10/19/18

This weeks work has been mostly ideas and less execution, about the many ways to build the arm to our robot. The arm we need to build will need to be lift up the caps within the arena as well as be able to place them on top of the poles surrounding the perimeter of the arena. We will most likely end up scrapping the design used for the previous challenge and replacing it with one which will accomplish both challenges including the flags and caps.
  

Finished! 12/13/18

We have now accomplished all parts of the challenge. Our first official try of the midterm challenge we achieved a score of 70% while our se...